一致する結果は見つかりませんでした。

別のキーワードでお試しください。

EGUC-F1S3

CAN Bus

M.2 2242 (USB HS)  to Single Isolated CAN FD

EGUC-F1S3

提供

  • Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
  • Data rate up to 2 / 4 / 5Mbps (For more details, refer to *Notes in the specification table below)
  • CAN 2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
  • CAN FD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data)
     

特徴

  • Additional driver to support Linux SocketCAN
  • Termination resistor enabled / disabled by jumper
  • Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
  • Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
     

製品の特徴一覧

  1. 1CAN Cable Connector
  2. 2DB9 Cable
EDGE AI FPGA Solution in Factory Automation
卓越したパフォーマンスを目指した設計

The EGUC-F1S3 is an M.2 CAN FD module compliant with ISO 11898-2 : 2016, supporting baud rates from 5 Kbps to 1 Mbps and data rates up to 5 Mbps. It handles up to 7,800 frames per second for CAN 2.0 and 6,000 frames per second for CAN FD. Key features include a CAN message acceptance filter, listen-only mode, and configuration retention after reboot. Additional drivers for Linux SocketCAN are included, along with termination resistor control via jumper. The module complies with 2.5 kV HiPOT protection and EN61000-4-2 ESD standards. Designed for industrial use, it operates within a temperature range of -40°C to 85°C, features a 30µ” golden finger, and comes with a 3-year warranty. It is manufactured by Innodisk in Taiwan.

変化の激しい環境へ導入し、成功

産業/組込み
産業/組込み

過酷な環境向けに設計された当社の製品は、産業オートメーションおよび組み込みシステムの要求を満たす高い耐久性を備えています。

監視と安全
監視と安全

当社のソリューションは高度な分析を行い、現代の監視ニーズに合わせて即時対応を提供します。

自動化
自動化

自動化されたシステムで効率を上げる当社の製品は、正確なデータ管理と長期間のパフォーマンスを産業アプリケーションで実現します。

仕様

Model NameEGUC-F1S3
Module TypeM.2 2242 to Single Isolated CAN FD
Form FactorM.2 2242 B+M Key
FunctionCAN FD
Input I/FUSB 2.0 High Speed (480Mbps)
Output I/FCAN FD
Output Port1
Output ConnectorDB-9
Max. Power Consumption2.62W (3.3V, 794.5mA)
Dimension (W x L x H/mm)22 x 42 x 7.55
TemperatureOperation : W/T -40°C ~ 85°C (Ta) Storage : -55°C ~ 95°C (Ta)
Vibration5G@[7~2000Hz]
Shock[email protected]
OS SupportWindows : 10 (32 / 64bit), and above version Linux : Kernel 2.6 and above (Native CDC-ACM driver), Kernel 2.6.38 and above (SocketCAN Driver), 32/64bit
Warranty3 Years
Notes*Data rate limitation : ● 2M supports normal rate 100k and above. ● 4M / 5M supports normal rate 250K and above.

注文情報

P/N説明

EGUC-F1S3-W1

M.2 2242 (USB HS)  to Single isolated CAN FD
読み込み中...