SSDs Protected From Data Loss Due to Power Failure by Innodisk's iData Guard Technology

Innovative new hardware and firmware system prevents data loss in power failures


September 1
8, 2013, Taipei, Taiwan – Innodisk, a designer and manufacturer of SSDs for industrial applications, is pleased to announce the development of a new patented technology, iData Guard. iData Guard is Innodisk's advanced hardware and firmware-based power failure protection system, which helps ensure SSD data integrity after sudden power outages. An informative Innodisk white paper, “Data Integrity In the Event of Abnormal Power Failure in SSDs”, explains the technology behind iData Guard.


Solid-state drives (SSDs) are far more robust than traditional HDDs; they are faster, more durable, and have lower operating costs. However, all storage devices are vulnerable to potential data loss caused by a sudden shutdown due to external power failure. Now, Innodisk’s iData Guard offers a combined hardware and firmware power-down recovery system that significantly reduces the probability of data loss or corruption.


If a SSD read or write operation is interrupted due to an unexpected loss of power, there can be inconsistencies in the data; it may not load successfully, and an ECC (Error Correcting Code) failure can occur, leading to data loss. iData Guard's first line of defense against this issue is a low power detector on the SSD. 


When the low power detector is triggered, a safe power-down recovery algorithm is executed to help prevent data loss and ensure data integrity. The controller will complete the current operation, using residual power stored in capacitors on the SSD, and then continue monitoring external power conditions to prevent further access to the flash memory while voltage levels are abnormal. If the power abnormality is brief, iData Guard can allow normal operations to continue, however, even if the power fails completely, iData Guard will be ready to take further action to protect data when power is restored.


iData Guard's work doesn't end when power fails. When power is restored, the patented iData Guard firmware scans the drive for errors caused by the power failure, restores the drive to a readable state, and recovers data that would otherwise be lost. With older SSD controller technology, an ECC failure is a likely result of power loss, but iData Guard is actually able to remap the data on the drive, remove corrupted data, and rebuild the original mapping table after an operation has been interrupted by power failure.


iData Guard is integrated in the storage device and requires no user intervention. Therefore it is always ready to protect data, no matter what the cause of the unexpected power loss: power outage or brownout, power supply failure, battery exhaustion, and even inadvertent disengagement of a live drive.


To learn more about the innovative technology behind Innodisk's iData Guard, please visit this page to download the white paper: http://bit.ly/innodisk_iData_Guard

 

About Innodisk

Innodisk is a designer, manufacturer and solution provider of enterprise-class SSDs and other flash storage products as well as DRAM for the enterprise, industrial, embedded, cloud, military & aerospace, transportation, medical equipment, communications & networking and gaming industries. Founded in 2005 and headquartered in Taipei, Taiwan with engineering support and sales teams in China, Europe, Japan, and the United States, Innodisk is able to support clients globally. With abundant experience and an unrivaled knowledge of the memory industry, Innodisk develops products with excellent quality, remarkable performance, great cost-efficiency, and the highest reliability. For more information about Innodisk, please visit http://www.innodisk.com/.