SATADOM
8GB ~ 128GB
SATADOM-SH 3ME3
Features
- SATA 6.0Gb/s interface
- High IOPS to reduce boot up timing
- Built-in Pin 7 power supply
- DRAM-less, 100% data integrity
- Innovative firmware algorithm
- Anti-vibration mechanical design
- Built-in iData Guard
- Supports wide temperature from -40°C to 85°C
Innodisk SATADOM-SH 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-SH 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3ME3 effectively reduces the boot time of the operation system, and the power consumption is less than that of a hard disk drive (HDD), which complies with ATA protocol. No additional drivers are required, and they can be configured as boot devices or data storage devices.
Cable-less Power – SIMPLIFIED CONNECTIVITY
Innodisk’s SATADOM SSDs are designed to integrate seamlessly into embedded systems, industrial computers, or server motherboards. With our patented Pin 7 Vcc technology, these drives enable plug-and-play functionality, eliminating the need for additional power cables and ensuring a streamlined, cable-free setup.
iData Guard – DATA PROTECTION TECHNOLOGY
iData Guard enables the immediate sending of a command in the event of a sudden power failure, interrupting read and write commands from the system and ensuring that the last command can be completed. This preserves data integrity on the SSD, protecting data security.
IMPLEMENTED WITH SUCCESS IN DYNAMIC ENVIRONMENTS
INDUSTRIAL / EMBEDDED
Designed for harsh environments, our products offer high durability to meet the demands of industrial automation and embedded systems.
AUTOMATION
Enhancing efficiency in automated systems, our products provide precise data management and long-lasting performance in industrial applications.
SPECIFICATIONS
| Model Name | SATADOM-SH 3ME3 |
|---|---|
| Flash Type | MLC |
| Interface | SATA III 6.0 Gb/s |
| Form Factor | SATADOM-SH |
| Capacity | 8GB ~ 128GB |
| Sequential R / W (MB/sec, max.) | 220 / 80 |
| P/E Cycle | 3,000 |
| TBW (Max.) | 37 |
| Storage Temperature | -55°C ~ 95°C |
| Max. Power Consumption | 1.8W |
| Max. Channels | 4 |
| External DRAM Buffer | N |
| Feature | S.M.A.R.T. |
| Dimension (W x L x H/mm) | 25.2 x 41.5 x 6.8 |
| Vibration | 20G@[7 ~ 2000Hz] |
| Shock | [email protected] |
| MTBF | >3 million hours |
| Warranty | 2 Years |
ORDER INFORMATION
Operating Temperature | Standard Grade (0°C ~ 70°C) | Industrial Grade (-40°C ~ 85°C) |
8GB | DESSH-08GD09*C1SC(F) | DESSH-08GD09*W1SC(F) |
16GB | DESSH-16GD09*C1SC(F) | DESSH-16GD09*W1SC(F) |
32GB | DESSH-32GD09*C1SC(F) | DESSH-32GD09*W1SC(F) |
64GB | DESSH-64GD09*CADC(F) | DESSH-64GD09*WADC(F) |
128GB | DESSH-A28D09* CADC(F) | DESSH-A28D09* WADC(F) |
*S : Toshiba A19nm MLC / B : Toshiba 15nm MLC
PN end with F is SATADOM Pin 7 with power supply version, which doesn’t provide power cable.
