Perfect choice for industrial purpose
InnoDisk, an innovative industrial storage and module manufacturer, has launched industrial grade 2.5" SSD SATA10000 series. Now, its capacity is upgraded to 128GB for both these series. SATA10000 series is perfectly suitable for industrial applications. The device has passed serial of harsh and rigorous environmental tests. The devices are perfectly suitable for industrial applications. SATA10000 series' host interface is SATAII 3.0Gbps and it support up to UltraDMA5. In terms of performance, for SLC-based flash ICs SSD, its maximum read speed is up to 160MB per second and maximum write speed is up to 140MB per second. Specifically, thanks to the static wear-levelling algorithm designed in SATA10000, the whole device erase time could reach to more than 2 billion times.

Passing the harsh environmental test
For environmental temperature test, SATA10000 can operate normally under minus 40 degree as well as plus 85 degree. Moreover, it is even able to work still under the thermal shock test which is under the temperature interval between minus 40 and plus 85 degree.
Considering industrial application has to work in extreme rigorous environment. InnoDisk has been concerning product reliability and has tested SATA10000 series for shock and vibration test. Specifically, SATA10000 outstandingly not only has passed the strict vibration test at the 20G acceleration (7~2000Hz) but also has passed the rigorous 1500G (0.5ms) shock acceleration test. According to the above reliability tests passed, InnoDisk believes that SATA10000 series, which is reliable, can fulfill the industrial application working under harsh environment.

Reliable data transfer performance
SATA10000 series supports AHCI (Hot-Swap) that brings more convenience while system operating. Build?in Error Correction Code (ECC) function can correct 8bit per 512 Byte. Moreover, its Mean Time Between Failures (MTBF) is more than 4 million hours.